Go to content Go to search
Attention Not all floors & accessories shown on this website are commercially available in every country. To check availability, please contact your local dealer. Not all floors & accessories shown on this website are commercially available in every country. To check availability, please contact your local dealer.

End Profile - Silver

  • Vinyl Accessories
  • End Profile
  • NEVENPSILV
  • Beautiful finish
  • For your vinyl floor
  • Respect expansion joints
  • Scratch-resistant top layer

Product features

Dimensions

Height 7 mm
Length 2000 mm
Width 24 mm
Product details 2000 x 24 x 7 mm

Need help?

Still left with questions or doubts? Don't hesitate to contact us!

Similar accessories

  • Expansion Profile

    • Vinyl Accessories
    • Expansion Profile - Silver
    • NEVEXPSILV
    • This very slim and elegant profile can be used to cover the expansion joint between 2 floors of the same height e.g. at a door entrance or in a large room/corridor where an expansion joint is required. Can be used with Vinyl Click (+) floors. Wear-resistant quality aluminium. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the expansion profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the expansion profile in the subprofile.
    • Expansion Profile
  • Stair Profile Inside Corner - Glue+

    • Vinyl Accessories
    • Stair Profile Glue Inner Corner
    • QSVSTPINGLUE
    • With this slim aluminium profile in a silver tone you can finish the inside corner of your stairs in combination with Quick-Step Vinyl Flex Glue+ floors.
  • Stair Profile Outside Corner - Glue+

    • Vinyl Accessories
    • Stair Profile Glue Outer Corner
    • QSVSTPGLUE
    • With this slim aluminium profile in a silver tone you can finish the outside corner of your stairs in combination with Quick-Step Vinyl Flex Glue+ floors.
  • Adapter Profile

    • Vinyl Accessories
    • Adapter Profile - Silver
    • NEVADPSILV
    • This very slim and elegant profile can be used to make the transition between a higher and a lower floor. Can be used with clicked vinyl floors. Wear-resistant quality aluminium. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the adapter profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the adapter profile in the subprofile.
    • Adapter Profile
  • Multifunctional Profile

    • Laminate Accessories
    • Multifunctional Profile Silver
    • QSPRSILV
    • You can use this wear-resistant aluminum profile with a silver tone to bridge height differences from 0 to 12.3 mm. You can place it between two Quick-Step laminate floors or two vinyl floors. Another option is to bridge a height difference between a laminate or vinyl floor and another lower or higher floor. Patent pending.
    • Multifunctional Profile Silver

End Profile - Silver

  • Vinyl Accessories
  • End Profile
  • NEVENPSILV
Enter your location