How to lay
vinyl flooring
Quick-Step vinyl floors: easy to install
All Quick-Step vinyl floors are very easy to install. All it takes is a few tools, a little patience, and some dedication. Download the full installation instructions that are specific to your floor, watch the video and follow the step-by-step guide for a smooth installation.
Download the vinyl flooring installation instructions
Watch the vinyl installation videos
Step-by-step guide for Alpha Vinyl floor installation
Preparation
STEP 1: Collect your tools
Make sure to have everything you need on hand, from a vinyl installation tool to a pencil and notebook. Save yourself a few trips and ensure you have all the tools listed in the video ready to go.
STEP 2: Golden rules
Before installing the floor, make sure both the space and the floor meet certain requirements:
- The floor should be acclimated to the room.
- The moisture level of the underlying floor must be within the acceptable range.
- The room temperature should remain above 5°C throughout the year.
Be sure to review the instructions with this specific information carefully before proceeding with the installation.
STEP 3: Prepare your subfloor
First, you’ll need to inspect the subfloor. While Alpha Vinyl can handle most irregularities, we highly recommend making sure the surface is level, stable and clean, and to remove all existing floor covering before getting started.
STEP 4: Door profile installation
Shorten the doorframes to accommodate the floor height and allow for extra expansion (up to 1 mm). Install a profile track before you begin laying the floor.
STEP 5: Unroll your underlay
If you're using a vinyl floor without an attached underlay, you should first unroll the vinyl underlay. Then, lay one row at a time, pushing it as close as possible to the wall, and ensure you're working in the same direction as you plan to lay the floor. Use adhesive tape to connect the rows and prevent any damage.
Installation
STEP 6: Start laying your Alpha Vinyl floor
- First, check how many full rows of planks you will need by dividing the width of the room by the width of a plank.
- Make a mark on the wall where you’ll be laying your last full plank. The last plank should be at least 5 cm wide to ensure easy installation.
- Unpack your planks and mix them up to avoid laying identical patterns and colour variations too close together.
- For best results, start laying your first row of Alpha Vinyl planks in line with the longest wall, but not flush against it (as walls are hardly ever perfectly straight).
- Make sure to alternate your alignment so that end joints of successive rows are never in line. We recommend at least 30 cm between them.
- Click the first plank of the second row into the first plank of the first row (see video) and keep going like that.
- Alpha Vinyl is not intended for "glued-down" installation.
Creating a herringbone pattern? Ordinarily, you’d need two different types of planks, A and B, which would mean slower and trickier installation. Not with Alpha Vinyl. Our herringbone floor has one ingenious type of plank that clicks on both sides, thanks to the Unizip system. Watch the video to install your Ciro floor.
STEP 7: Cut your Alpha Vinyl floor
Inevitably, you’ll need to cut your Alpha Vinyl planks to complete your floor. Wear gloves and use a pencil to draw your cutting lines. Always saw your planks with the top surface decoration facing upwards.
Finishing
STEP 8: Finish your Alpha Vinyl floor in style
Almost there! Now, it’s time to complete the picture with matching skirting boards, finishing profiles, stair covers and other finer touches. After all, it’s all in the details!
Still got questions?
Need help finishing your project to your satisfaction?
Take a look at our help centre, which contains answers to the most frequently asked questions!